6" Digital Readout DRO Large LCD Readout Scale for Bridgeport Mill Lathe

6″ Digital Readout DRO Large LCD Readout Scale for Bridgeport Mill Lathe
PRODUCT DESCRIPTION
BRAND NEW
6″ Digital Readout DRO Large LCD Readout Scale for Bridgeport Mill Lathe
Max. Measuring Range:
6″/150mm
Resolution:
0.0005″/0.01mm
Tolerance Range:
0.0025″/0.06mm
Accuracy:
+/-0.001″ (+/-0.01mm)
Repeatability:
0.0005″/0.01mm
LCD Display:
0.001″/0.01mm /64ths/inch
On/Off, inch/mm/Fraction, Zero reset, Incremental/Absolute, Set
Fractional reading in 64thincrement
Can be used in Vertical,Horizontal or any position with the mounting hardware
Zero point can be set anywhere along the full travel for comparing measurement
No rack, pinion, or glass scale. Linear scale is safely embedded in the light weight aluminum scale body
Micro USB connection port between the scale and the digital readout
One end of wire is welded to electronic ruler, the other end is connected with a Micro USB cable connector and monitor
Digital signal input terminal is a Micro USB interface, more reliable than the original SPC interface
Features auto turn-off if sit idle to save battery power; when turn on the caliper at the same measurement coordinate (without changing the travel of the caliper) it will remember the numeric value of this coordinates before it auto turn-off
Batteries Required:
(2)3VCR2032 (NOT included Batteries)
Shipping Weight:
10 oz
Quantity:
1
Shipping:
Small Item Shipping